LabeLase® Producer

Printer Menu


The Printer menu gives you the ability to control various aspects of the printer.

Accept

Accept the data entered  into the Operator Data Entry fields and create a print job in the Job Queue. The new print job is added to the bottom of the queue and will appear at the end of the list. You may reprioritize the list by dragging and dropping print jobs.

 

Begin Printing

Begin printing tags.  To start printing, the printer must have tag material loaded and there must be at least one job in the Job Queue .

 

Abort

Abort the current printing cycle. This menu item is only available if the program is currently printing. The print operation is aborted immediately without finishing the tag. The tag will not be counted, nor will it increment is serial number(s).

 

Feed Tag

Feed one tag to the break-off position.

 

Reverse Feed

Reverse feed a tag back into the printer.

 

Unload

Unload all tags from the printer. The printer will reverse feed the motor until the sensor detects that no tag material is present.

 

Note that all of the Printer Menu items except for Unload Tags has an associated function key. Pressing the function key is the same as clicking the item in the menu.

Some printer controls are also available as buttons on the Job Control tab.

 

 

Copyright © 2018 InfoSight Corporation All Rights Reserved
InfoSight® is a registered trademark of InfoSight Corporation